ZOOM + ROTOFLUX IN THE SHAFT MOUNTING

 
ROTOFLUX IN THE SHAFT MOUNTING
1 PASSAGE, SIZEZ FROM ¼" TO ½"
The unions of the model V are designed for inside the shaft mounting with short overhang. They are available with two different micro-lapped sealing assemblies:
• N model (standard), with carbon graphite to tungsten carbide seals, for air, vacuum and hydraulic oil at 20 bar max pressure.
• D model (heavy duty) with tungsten carbide to tungsten carbide seals for hydraulic oil applications.
The Model V6,very short it is provided with a center spring and with N seals in stainless steel to carbon graphite or with D seal in stainless steel against bronze.
Do not use the unions at max application limits without consulting ROTOFLUX.

 
ZOOM +
 
Download PDF (130,20 KB)
  Air Vacuum Oil Water
¼" ÷ ½" - 10 bar / 150 PSI ¼" ÷ ½" - 6,7 Kpa / 28"Hg ¼" ÷ ½" - 50 bar / 750 PSI ¼" ÷ ½" - 50 bar / 750 PSI
120°C / 250°F 120°C / 250°F 120°C / 250°F 120°C / 250°F
  ¼" ÷ ½" ¼" ÷ ½" ¼" ÷ ½" ¼" ÷ ½"
3.500 3.500 3.500 3.500

ZOOM +
Ordering Code In the shaft mounting
N D A D E F G H I L P QH8 X Kg
V06-302-01R V06-301-01R G ¼”RH 3,5 71 28,4 20 23 11 28 47,5 28,5 15 0,4
V08-302-01R V08-301-01R G ¼”RH 7 82 44,3 20 23 11 50 58,5 44,5 17 0,6
V10-302-01R V10-301-01R G ⅜”RH 9 91 49 25 27 13 54 63,5 49,2 17 0,7
V15-302-01R V15-301-01R G ½”RH 13 96 58,5 30 28 13 58 67,5 58,7 24 1,3

 
 
Rotoflux S.r.l. Via Staffora, 18/11
I 20090 Opera (MI)
Italy		 Partita IVA 11858450155
Cap. Soc. € 10.400,00 i.v.
REA MI 1502939
Reg. Impr. MI 754084 		EMAIL  Email rotoflux@rotoflux.com
 Tel. +39 02 576 073 78
 Fax +39 02 576 052 19