Even if the ROTOFLUX unions are solid and stout, they must be handled with care. For a proper installation we suggest to proceed as follows:
- Make sure that the fluid circuit, when new, has been properly cleaned and made free from any machining burr or abrasive particle. In existing fluid circuit make sure that the filter quality and functionality are in accordance with the normal requirements of hydraulic circuit.
- Clamp in a bench vice the rear of the union and fasten the flexible hose. (sketch 1).
- Do not use solid pipes.
- Install the rotary union on to the shaft. ( sketch 2).
- Connect the flexible hose to the supply line. Make sure that the union is not installed taut. (sketch 3).